CRANE & MACHINE LTD
QUALITY EQUIPMENT FROM SCOTLAND TO THE WORLD
* USED/NEW OVERHEAD/GOLIATH CRANES
* METAL WORKING MACHINERY
* EQUIPMENT FOR OFFSHORE FABRICATION/RENEWABLES/ SHIPBUILDING INDUSTRIES
* MODULAR TRAILERS/TRANSPORTERS
* CRAWLER/MOBILE CRANES
* MARINE EQUIPMENT...BARGES/WINCHES
SPECIAL OFFERS
CLICK ON PHOTOS FOR MORE INFO
UNUSED NEW BUILD FLAT TOP BARGES x 2..Identical
Length 82m
Width 28m
Depth 5.9m
Built in 2014
Deck Load 15 tonnes/m2
FLAT TOP BARGE
Length 91.5m
Width 24.4m
Depth 5.5m
New 2010
Deck Load 10 tonnes/m2
Complete with 4 x 35 ton Line Pull Hydraulic Winches, Diesel Generator
In class ABS A 1 Ocean going
KAMAG platform trailer(SPMTs) 44axle lines
YOM : 2007yr.
2406HS4E(06axle) x 06pcs. = 36axle lines 2404HS2E(04axle) x 02pcs. = 08axle lines
PPU 17(395HP) x 02pcs. (approx. 3,600hrs. each) (Total 44axles with 02PPUs
LIFT SYSTEMS 400 Ton(US) 4 Point Hydraulic Gantry
2 sets
Year 1994 only used 9/10 times since new
Diesel Hydraulic Power Packs
Max. Lifting Height 8.75m
Complete with long travel tracks
LINDEN COMANSA 48 tonne Flat Top Tower Tower Crane
Maximum Height to Underside Boom 108m
Boom Length 84.4m
Maximum Self Erecting Height 78m/14 sections
Counter Boom Length 31m
Counter weight 30 tonnes
New 2012
110Kw Main drive motor
Condition Excellent
HUGH SMITH 400 TON HYDRAULIC SHIP FRAME BENDER
Maximum Capacities:
Bulb Flats/Holland profile in pairs 430mm wide
Angles in Pairs back to back 200 x 100
T Sections 600 x 250
Complete with 2 x Wheel mountedWorkpiece support frames
Electrical Controls/Panels upgraded.
PALFINGER PEDESTAL OFFSHORE CRANE
UNUSED
Max Lifting Capacity 47 tons
Year of Manufacture 2015
Never Installed
Location: Masan Docks, Korea
PALFINGER PEDESTAL OFFSHORE CRANE
UNUSED
Max Lifting Capacity 19 tons
Year of Manufacture 2015
Never Installed
Location: Masan Docks Korea
Location
COMETTO MULTI AXLE DRAWBAR TRAILERS
MODEL 61MS
3 x 6 Axle Line Units
Year 2002 - 2007
Power Pack Units
Draw Bars
EDEN (Italy) Rubber Tyre Gantry/Straddle Carrier
Max Lifting Capacity 130 tonne
Diesel Hydraulic drive
Year when new 2010
Unused since new
Dimensions:
Length 11.3m
Width 9.85m
Height 10.1m
Maximum Lift Height with Spreader 6.9m
Spreader beam 12m Long
Deutz Engine
Travel Speed 0 - 3km/hour
Maximum Gradient 6 degrees
Lift Speed 0 - 3m/min laden
0 - 6m/min unladen
Trolley speed 2m/min
Unused since new.
Click PDF for Specification & photos
KONE 150/80/10 TON Overhead Crane
Span 20m
Height of Lift 18m
Year of manufacture 2019
New and Unused
3 Independent Hoist Units
Power Rotation Hook on 150 ton Hoist
Full Kone Warranty
DEMAG 15 /1 ton Capacity Overhead Crane
Maximum Lifting Capacity 15 tonnes
Aux. Hoist 1 tonnes
Span 16m
Height of Lift 10m
Year Of Manufacture 1979
Radio Control
Excellent condition
HUGH SMITH 5 Roll Hydraulic Plate Levelling Rolls
Maximum Capacity 4m wide x 60mm thick
Maximum Clearance between top & bottom rolls 200mm
5 Rolls 3 over 2
All Rolls Backed up
Bottom Rolls Driven
Mai Drive 200HP
Hydraulic Top Roll Adjustment
Machine weight 175 tons.
900 Tonne Capacity Shipyard Gantry Crane
Span/Rail Centres 162.5m
Height of Lift 78m
2 x 450 tonne Hooks
1 x 600 tonne Hook
Year 2009
Kocks Design
COMETTO SELF PROPELLED MULTI AXLE Trailers
MODEL MSPE64
8 x 6 Axle Line Units Year 2007
3 x 335 KW PPUs Year 2007
2 x 6 Axle Line Units Year 2011/12
1 x 335 KW PPU Year 2011
COMETTO SELF PROPELLED SHIPYARD TRANSPORTERS
MODEL SYT 10/5
2 x Units
Maximum Payload 520 tons each
Tare weight 109 tonnes each
Platform size 24m x 6m
Year of manufacture 2009
440KW main drive, Deutz Diesel Engine
Low working Hours
Only used for one project
Shuttlelift Rubber Tyre Gantry/Straddle Carrier
Max Lifting Capacity 27 tonnes
Year 2002
Diesel Hydraulic drive
Steering on 2 x axles
Year when new 2002
Lift Height on hooks 5m
Spreader beam 10m Long
Cummins Engine
Travel Speed 0 - 4km/hour
Fitted with 3 x Magnets for plate/section handling
